1st Industrial Data Analytics and Digital Manufacturing (IDADM) Workshop

Fri, 20 Dec 2024 18:00:00 +0800

Table of Contents

Agenda

Date: December 20-22, 2024
Theme: Data-Driven Intelligent Decision Making for Better Manufacturing

December 20th, Friday

Time	Content
Evening	Registration

December 21st, Saturday

gantt title Workshop Schedule - December 21st dateFormat HH:mm axisFormat %H:%M section Morning Opening Remarks :09:00, 30m Group Photo :09:30, 10m Keynote I :09:40, 30m Keynote II :10:10, 30m Coffee Break :10:40, 20m Keynote III :11:00, 30m Keynote IV :11:30, 30m Lunch Break :12:00, 120m section Afternoon IDADM Report I :14:00, 70m Break :15:10, 20m IDADM Report II :15:30, 60m Closing Remarks :16:30, 10m

Time	Content	Remarks
9:00-9:30	Opening Remarks	Chair: Prof. Fugee Tsung, Chair Professor at HKUST (GZ), Director of Triple-i
	Prof. Ricky Lee, Dean of Systems Hub at HKUST (GZ)
	Prof. Lei Chen, Dean of Information Hub at HKUST (GZ)
	Prof. Kai Tang, Head of Smart Manufacturing Thrust at HKUST (GZ)
9:30-9:40	Group photo session
9:40-10:10	Keynote Speech I
	Speaker: Prof. Judy Jin, Professor at the University of Michigan
	Title: Machine Learning to Empower In-Situ Quality Control for Smart Manufacturing
10:10-10:40	Keynote Speech II
	Speaker: Prof. Jingshan Li, Full Professor at Tsinghua University
	Title: Sustainable Manufacturing Systems: Smart Planning and Operation for Green Manufacturing
10:40-11:00	Coffee/Tea Break
11:00-11:30	Keynote Speech III	Chair: Prof. Fugee Tsung, Chair Professor at HKUST (GZ), Director of Triple-i
	Speaker: Prof. Hui Yang, Professor at Penn State
	Title: Sensor-based Modeling and Optimization of Additive Manufacturing
11:30-12:00	Keynote Speech IV
	Speaker: Prof. Andrea Matta (online), Full Professor at Politecnico di Milano
	Title: Data-driven Approaches Towards Autonomous Digital Twins
12:00-14:00	Lunch
14:00-15:10	IDADM Report I	Chair: Prof. Juan Du, Assistant Professor at HKUST (GZ), Associate Director of Industrial Intelligence and Data Analytics Lab
	Speaker 1: Prof. Juan Du, Assistant Professor at HKUST (GZ)
	Title: Introduction and Recent Advances of IDADM Lab
	Speaker 2: Peng Ye, MPhil student in Smart Manufacturing Thrust, HKUST (GZ)
	Title: Sequential Actuator Placement Selection and Optimization for Aircraft Fuselage Assembly via Reinforcement Learning
	Speaker 3: Xuanming Cao, PhD student in Smart Manufacturing Thrust, HKUST (GZ)
	Title: Deep Subspace Learning for Surface Anomaly Classification Based on 3D Point Cloud Data
15:10-15:30	Break
15:30-16:30	IDADM Report II	Chair: Prof. Juan Du, Assistant Professor at HKUST (GZ), Associate Director of Industrial Intelligence and Data Analytics Lab
	Speaker 1: Letian Bai, PhD student in Smart Manufacturing Thrust, HKUST (GZ)
	Title: Key Variable Identification and Quality Prediction in Nonlinear Multistage Manufacturing Processes of Ceramic Firing Process
	Speaker 2: Mingze Gong, PhD student in Smart Manufacturing Thrust, HKUST (GZ)
	Title: Gradual Degradation Modeling in UAV Systems for Anomaly Detection
	Speaker 3: Jiaping Cao, PhD student in Smart Manufacturing Thrust, HKUST (GZ)
	Title: FIT3D: Real-time Flatness Inspection Algorithm for Ceramic Tiles using the Structured Light 3D Scanner
16:30-16:40	Closing Remark
	Speaker: Prof. Kai Tang Prof. Fugee Tsung

December 22nd, Sunday

Time	Content
Morning	Campus and Lab Visit

Keynote Abstracts

Keynote Speech I: Machine Learning to Empower In-Situ Quality Control for Smart Manufacturing

Speaker: Prof. Jionghua Judy Jin, A. Galip Ulsoy Collegiate Professor of Engineering at the University of Michigan

Introduction:
Dr. Jionghua Judy Jin is the A. Galip Ulsoy Collegiate Professor of Engineering and a professor in the Department of Industrial and Operations Engineering at the University of Michigan. Her research focuses on the intersection of data science and quality engineering, emphasizing the integration of process design and operational data to enhance quality control decision-making.

Her research has been widely implemented in various industrial production systems and has received numerous awards, including:

17 Best Paper Awards
Forging Achievement Award
NSF CAREER Award
NSF PECASE Award

Dr. Jin currently serves as the Focus Issue Editor for IISE Transactions on Data Science, Quality, and Reliability and is the Editor-in-Chief elect of IISE Transactions.

Abstract:
The convergence of advanced sensor technologies and the Internet of Things has created unprecedented opportunities for smart manufacturing. However, the abundance of data also presents significant challenges, particularly in analyzing massive, high-dimensional streaming data characterized by spatial and temporal heterogeneity with complex functional dependencies.

This talk will explore how the rapid evolution of machine learning techniques can address these challenges to enhance in-situ quality control decision-making for smart manufacturing. The presentation will include:

Opportunities and challenges in quality engineering for smart manufacturing
Examples demonstrating the critical role of machine learning in handling complexities of online sensing data for automatic defect detection and enabling continuous learning for in-situ quality control

Keynote Speech II: Sustainable Manufacturing Systems: Smart Planning and Operation for Green Manufacturing

Speaker: Prof. Jingshan Li, Full Professor at Tsinghua University

Introduction:
Dr. Jingshan Li is a full professor in the Department of Industrial Engineering, Tsinghua University. He is an IEEE Fellow, an IISE Fellow, and an IEEE Distinguished Lecturer in Robotics and Automation. Prior to joining Tsinghua University, he was a tenured professor in the Department of Industrial and Systems Engineering at the University of Wisconsin-Madison, where he worked until September 2021.

Dr. Li’s main research areas are in modeling, analysis, and control in manufacturing and healthcare systems. His innovative contributions are widely recognized, with numerous peer-reviewed journal articles, conference proceedings, two textbooks, and seven edited book volumes.

Dr. Li has received many prestigious awards, including:

NSF CAREER Award
IEEE Early Career Award in Robotics and Automation
Best Paper Awards from IEEE Transactions, IIE Transactions, and prestigious international conferences
Best Textbook Award
Multiple awards from UW Madison

He has served as a Senior Editor for several top journals and chaired flagship conferences in his field.

Abstract: In order to respond to climate change, carbon peak and carbon neutrality have become strategic goals worldwide. Manufacturing ranks third in both energy consumption and greenhouse gas emissions, and first in toxic releases. Therefore, manufacturing must prioritize sustainability and transition to green practices. Sustainable manufacturing systems are critically important to the global economy, supply chains, and societal benefits. These systems typically encompass two key areas: 1. Manufacturing systems that produce green technology or renewable energy products. 2. Scheduling, control, and optimization of manufacturing processes to reduce energy consumption and emissions. This talk will review recent progress in sustainable manufacturing systems, focusing on the analysis, design, and optimization of these systems. Through examples in battery manufacturing, energy-intensive production, and system redesign, we will introduce smart planning and scheduling methods to reorganize processes and operations, achieving energy-efficient and environmentally friendly manufacturing.

Keynote Speech III: Sensor-based Modeling and Optimization of Additive Manufacturing

Speaker: Prof. Hui Yang, Professor at Penn State

Introduction:
Dr. Hui Yang is a Fellow of IISE and a Professor of Industrial and Manufacturing Engineering and Biomedical Engineering at Penn State. He is affiliated with the Penn State Cancer Institute (PSCI), Clinical and Translational Science Institute (CTSI), Institute for Computational and Data Sciences (ICDS), and CIMP-3D.

Dr. Yang serves as the Director of the NSF Center for Health Organization Transformation (CHOT). Before joining Penn State in 2015, he was an Assistant Professor in the Department of Industrial and Management Systems Engineering at the University of South Florida from 2009 to 2015.

Dr. Yang has held leadership roles, such as:

President of IISE Data Analytics and Information Systems Society (2017-2018)
President of INFORMS Quality, Statistics, and Reliability (QSR) Society (2015-2016)
Program Chair of the 2016 IISE Annual Conference

He is the Editor-in-Chief for IISE Transactions on Healthcare Systems Engineering and an Associate Editor for numerous top-tier journals, including IISE Transactions, IEEE Journal of Biomedical and Health Informatics (JBHI), ASME Journal of Computing and Information Science in Engineering (JCISE), IEEE Transactions on Automation Science and Engineering (TASE), IEEE Robotics and Automation Letters (RA-L), and others.

Abstract:
Additive Manufacturing (AM) provides a greater level of flexibility to produce 3D parts with complex geometries directly from designs. However, widespread application of AM is hampered by technical challenges in process repeatability and quality control.

This talk presents a new sequential decision-making framework for in-situ control of AM processes using the Constrained Markov Decision Process (CMDP). The CMDP framework jointly considers the conflicting objectives of total cost (e.g., energy or time) and build quality.

The talk will focus on:

Advanced sensing for real-time monitoring of AM processes
Analytical methods for feature extraction sensitive to layerwise defects
Sequential decision-making approaches for in-situ corrective actions during AM builds

Experimental results demonstrate how the CMDP formulation provides effective policies for executing corrective actions to repair and counteract incipient defects in AM before the build is completed.

Keynote Speech IV: Data-driven Approaches Towards Autonomous Digital Twins

Speaker: Prof. Andrea Matta, Full Professor at Politecnico di Milano

Introduction:
Dr. Andrea Matta is a Full Professor of Manufacturing and Production Systems at the Department of Mechanical Engineering, Politecnico di Milano. He also serves as a Guest Professor at Shanghai Jiao Tong University. Since graduating in Industrial Engineering from Politecnico di Milano, Dr. Matta has been actively involved in teaching and research there since 1998.

Dr. Matta has held various distinguished positions, including:

Distinguished Professor at the School of Mechanical Engineering, Shanghai Jiao Tong University (2014-2016)
Visiting Professor at Ecole Centrale Paris (France), University of California at Berkeley (USA), and Tongji University (China)

Dr. Matta is currently the scientific lead for the Research Area Design and Management of Manufacturing Systems at MUSP (Laboratory for Machine Tools and Production Systems). His expertise spans analysis, design, and management of manufacturing and healthcare systems.

Dr. Matta has published more than 130 scientific papers in international journals and conference proceedings. He is the Editor-in-Chief of the Flexible Services and Manufacturing Journal and serves on the editorial boards of the OR Spectrum journal and IEEE Robotics and Automation Letters.

His awards and recognitions include:

Shanghai One Thousand Talent
Eastern Scholar Award (2013)
Recognition as a leading scholar in production research by the International Journal of Production Research

Title:
Data-driven Approaches Towards Autonomous Digital Twins

Abstract:
With the emergence of Industry 4.0, digital representations of production systems—commonly referred to as digital twins—have transitioned from being peripheral tools to becoming central to manufacturing operations. Unlike traditional simulation models used for offline what-if analysis, digital twins are developed as self-adaptable and empowered decision-makers that remain dynamically aligned with the real system.

These new capabilities have established digital twins as key enablers for implementing the smart manufacturing paradigm. However, significant challenges remain in adopting digital twins within industrial applications. Key barriers include:

The high skill requirements for creating and updating digital twin models.
Long development times and limited integration with optimization and AI packages.
Frequent changes in manufacturing systems during their lifecycle, which exacerbate these issues.

This presentation will describe data-driven approaches for generating, synchronizing, and validating multi-perspective models for digital twins of discrete event systems using sensor data.

Additional Information

Triple-i Institute

The Triple-i Institute is dedicated to establishing a new scientific foundation for the design, analysis, and control of complex manufacturing and service systems. It bridges the gap between data analytics, engineering systems, and industrial practice by integrating systems and information with data-driven, model-driven, and problem-driven methodologies.

Key research areas include:

Industrial carbon neutrality
Industrial intelligence
Industrial IoT

The institute also emphasizes industrial engagement, education, and training in industrial informatics.

IDADM Lab

The IDADM Lab, directed by Dr. Juan Du, aims to revolutionize the manufacturing industry by leveraging data analytics, machine learning, and artificial intelligence to achieve:

Significant quality and productivity improvements
Cost reductions
Energy conservation

The lab addresses challenges in continuous and discrete manufacturing sectors, including:

Ceramics manufacturing
Semiconductor manufacturing
Solar cell manufacturing
Pipe tightening process
Composite fuselage assembly
Ship assembly

More information: IDADM Lab Website

Smart Manufacturing Thrust

The Smart Manufacturing Thrust focuses on adaptive and agile computer-integrated manufacturing technologies, leveraging digital analysis and intelligent technologies to develop more flexible and efficient manufacturing processes.

Key research areas include:

Micro-nano manufacturing
Multi-scale dynamic modeling and simulation
Additive and hybrid manufacturing
Precision multi-axis and robotic processing
Intelligent sensing and industrial big data analysis

Data Science and Analytics (DSA) Thrust

The DSA Thrust is dedicated to fostering a dynamic learning environment that equips students with the knowledge, skills, and ethical values required to excel in the rapidly evolving field of data science.

The thrust promotes:

Interdisciplinary collaboration
Cutting-edge research
Data-driven decision-making

Through academic programs, research initiatives, and meaningful partnerships with industry and community stakeholders, the DSA Thrust aims to shape the future of data science and analytics and drive innovation across diverse domains.

Transportation & Accommodation Guide

Transportation Guide

1. Guangzhou Baiyun International Airport

Option 1 - Metro Route:

Distance: 90km
Take Metro Line 3 (North Extension) to Tiyu Xilu Station
Transfer to Line 3 to Kecun Station
Transfer to Line 8 to Wanshengwei Station
Transfer to Line 4 to Jiaomen Station
Walking: About 15 minutes (400m south along Phoenix Avenue, then 500m west)
Total journey time: ~1 hour 50 minutes

Option 2 - Alternative Metro Route:

Take Metro Line 3 (North Extension) to Tiyu Xilu Station
Transfer to Line 3 to Zhujiang New Town Station
Transfer to Line 5 to Chebeinan Station
Transfer to Line 4 to Jiaomen Station
Walking: Same as Option 1
Total journey time: ~1 hour 50 minutes

Option 3 - Taxi:

Distance: 90km
Cost: ~350 RMB (including ~40 RMB toll fee)

2. Shenzhen Bao’an International Airport

Option 1 - Metro + High-Speed Rail:

Distance: 63km
Take Shenzhen Metro Line 11 to Qianhai Bay
Transfer to Line 5 to Shenzhen North Station
Take high-speed rail to Qingsheng Station
- Train times from Shenzhen North: 8:00, 11:46, 12:07, 13:09, 13:14, 13:56, 15:20, 15:43, 17:34, 18:38
- Duration: 21 minutes
- Ticket price: 49.5 RMB
Take Metro Line 4 to Jiaomen Station (12 minutes)
Walking: 15 minutes

Option 2 - Taxi:

Cost: ~260 RMB (including ~60 RMB toll fee)

3. Guangzhou South Railway Station

Option 1 - Metro + Bus:

Distance: 42km
Take Metro Line 22 to Panyu Square Station
Transfer to Line 18 to Hengli Station (~30 minutes)
From Gate D, walk to Hengli Bus Station
Take Nansha G1 Bus to Jiaomen Village Arch Station
Walking: About 5 minutes (100m south along Fengze West Road, then 100m east)

Option 2 - Metro Route:

Take Metro Line 7 to Higher Education Mega Center South Station
Transfer to Line 4 to Jiaomen Station
Total journey time: ~1 hour 5 minutes
Walking: About 15 minutes (400m south along Phoenix Avenue, then 500m west)

Option 3 - Taxi:

Distance: 42km
Cost: ~130 RMB (including ~15 RMB toll fee)

4. Qingsheng Station

Option 1 - Metro:

Distance: 4.7km
Take Metro Line 4 (towards Nansha Passenger Port) 6 minutes to Jiaomen Station

Option 2 - Taxi:

Distance: 4.7km
Cost: ~10 RMB

Campus Dining

Xinlianxin Restaurant
- Location: 1st floor, Building C6
Double Tree Hong Kong Restaurant
- Location: 2nd floor, Building C6
Starbucks
- Location: Ground floor, east side of Building C1
KFC
- Location: Ground floor, Building 2A
Sum Look Café
- Location: 2nd floor middle hall, Building E2
Yiwan Guifen
- Location: Ground floor, South District Apartment 2A
Real Kung Fu
- Location: 1st floor, Core Campus Building 5C

Note: For campus navigation, please use the WeChat Mini Program “科大GO”.

交通&食宿指南

交通指南

1. 广州白云机场

路线一 - 地铁路线:

距离：90公里
乘地铁3号线（北延段）至体育西路
换乘地铁3号线至客村地铁站
换乘地铁8号线至万胜围地铁站
换乘地铁4号线至蕉门地铁站
步行：沿凤凰大道向南约400米，向西约500米，约15分��
总行程时间：约1小时50分钟

路线二 - 地铁替代路线:

乘地铁3号线（北延段）至体育西路
换乘地铁3号线至珠江新城地铁站
换乘地铁5号线至车陂南地铁站
换乘地铁4号线至蕉门地铁站
步行：同路线一
总行程时间：约1小时50分钟

路线三 - 出租车:

距离：90公里
费用：约350元（含约40元高速费）

2. 深圳宝安机场

路线一 - 地铁+高铁:

距离：63公里
乘坐深圳地铁11号线至前海湾
换乘深圳地铁5号线至深圳北地铁站
乘坐高铁至庆盛高铁站
- 深圳北发车时间：8:00、11:46、12:07、13:09、13:14、13:56、15:20、15:43、17:34、18:38
- 行程时间：21分钟
- 票价：49.5元
乘坐地铁4号线至蕉门地铁站（约12分钟）
步行：15分钟

路线二 - 出租车:

费用：约260元（含约60元高速费）

3. 广州南站

路线一 - 地铁+公交:

距离：42公里
乘地铁22号线至番禺广场地铁站
换乘地铁18号线至横沥地铁站（约30分钟）
从D口出站步行至横沥站公交站
乘坐南沙G1路至蕉门村牌坊站
步行：沿丰泽西路向南约100米，向东约100米，约5分钟

路线二 - 地铁路线:

乘地铁7号线至大学城南地铁站
换乘地铁4号线至蕉门地铁站
总行程时间：约1小时5分钟
步行：沿凤凰大道向南约400米，向西约500米，约15分钟